DECONTAMINATION TRAILER
3-stage decontamination trailer suitable for emergency crews, construction sites, demolition teams, hazardous material (hazmat) teams
The decontamination features a three stage design for the decontamination area. This consists of a dirty zone, shower zone, and clean room sone separated by a door. Ventilation is included to push air from the clean room into the dirty room to prevent cross contamination. Additionally this unit is equipped with a spacious office/command area at the rear of the trailer with it's own entrance door, window, lighting and desk.
The decontamination trailer has been designed to be durable, easy to use and to ensure effective and safe operation. The material choice for the trailer consists of chemical resistant surfaces that can easily be hosed and deep cleaned when required. The trailer features onboard tanks to ensure that you always have a water supply when attending a site as well as allowing contaminated water to be transported away from the site for safe disposal.
The decontamination trailer is built for industry. The ease of use of the unit and intuitiveness of the design allows it to be packed away quickly, safely and efficiently. Security is also a key feature on the unit as it is equipped with a foldaway a-frame step, ASSA ABLOY locks that are keyed alike so a single key can operate the unit, and electronic door lock system. The lightweight construction of Scanvogn decontamination trailers allows it to be towed by any passenger vehicles with a braked towing capacity greater than 1700kg. The federally approved AL-KO Mechanical Overrun Braking system also eliminates the requirement for any electric brakes.
The Scanvogn decontamination trailer connects to a standard 50mm tow bar and can be set up and ready in minutes. This allows you to move the trailer from one location to another, quickly and efficiently and without any hassle. The trailer is made from cleaning-friendly and durable materials, saving you time on cleaning and maintenance.
The decontamination trailer features onboard freshwater and waste tanks to allow it to be deployed in more remote areas.
External: 5700 x 2280 x 2900 mm
Internal: 5596 x 2176 x 2100 mm
Tare weight: 1675 kg
ATM weight: 2000 kg
Capacity: 4 people (2x Decontamination + 2x Office)
2x 3-stage decontamination zones
1x 2176 x 2120 mm office area
Fixed desk 2176 x 610 mm, 2 chairs
Kitchenette bench with sink and 3x cupboards
1180 x 663 mm double glazed window (office area)
2x 530 x 430 mm frosted double glazed windows (shower area)
2x towel holders, 10x coat hooks
5x removable stairs
1x step grate (a-frame)
4x closable passive air vents
Electric extraction fan system
4x corner drop stands
Dirty clothing/equipment hatch in dirty zone
Magnetic door lock system for decontamination zones
1x 240 V - 16 A CEE inlet
Multiple 240V 10A outlets
Gas hot water heater with dual 9kg gas bottle storage cabinet
Internal LED lighting
External green/red Futedo LED lighting above doors
Fuseboard
Macerator for shower water
400 L water tank
500 L waste tank
2x 750 W heaters
Item: 129409
We cut all the insulated trailer outer wall panels without a seam and fit them so that the all angles seal closely around the floor. We also cut the corners seamlessly and assemble them with sturdy anodised aluminium profiles. This results in an enclosed cabin with maximum trailer body strength and density and ensures you and your team get the highest quality.
All our mobile trailer cabins come with a solid, single piece-cast roof. This ensures your portable unit is weatherproof in all conditions, this also significantly increases its lifetime. The roof is cast with an even curve for optimal strength and water drainage. The roof also has a gutter system, which helps direct water and dirt away from doors and windows.
We only maintain the highest standards for corrosion protection. All our portable trailer cabins come with a sturdy hot dipped galvanised steel chassis. Galvanising is only completed once the chassis has been machined, this ensures that all the edges and bolt holes have also been galvanised and sealed against the elements for the ultimate in longevity.
Scanvogn Australia. 2 Aston Rd, Erina NSW 2250. Central Coast portable cabins and lunch rooms
Tel: (02) 4367 0026 | Email: info@scanvogn.com.au
Scanvogn Australia
The Yard, 2 Aston Rd
Erina
NSW 2250
Tel: (02) 4367 0026
Email: info@scanvogn.com.au
We are a leading manufacturer of mobile solutions for the construction and events industries. We understand our customers' challenges and will work with them to quickly and efficiently find the right solution.
Our aim is to deliver a product of the best quality with a considered design, to give the builder the most effective work tool with a long lifetime.
Do you need information, tips or advice? Do you need repair service or spare parts? Just give us a call or write us an email.
When you shop with us, you are in safe hands. Our cabins are first and foremost built with an
eye for functionality. We provide global transport to your address or directly to the site where you want to use your cabin.
(02) 4367 0026
